Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Air Quality & Sanitizing in Denver: What to Know First
CleanRun provides independent Abatement Technologies air quality and sanitizing in Denver, with most jobs scheduled within 3-5 business days and a written price delivered before any work starts. A typical Abatement Technologies whole-system sanitizing with documented photo record runs $380-$650 depending on system size and contamination level. We’re not affiliated with Abatement Technologies; we service their equipment as an independent provider with trade-recognized tools and a 365-Day Done Right Promise backed in writing.
This page is for Denver homeowners who own Abatement Technologies air filtration, HEPA units, or portable abatement equipment and need mold treatment, bacteria sanitizing, odor removal, UV light installation, or allergen reduction. If you’re seeing musty output, reduced airflow, or persistent odors from your Abatement Technologies system, call (720) 799-2292. We’ll put a written estimate next to any competitor’s quote for free.
How Abatement Technologies Products Fail - and How We Fix Them
- PREDATOR 750 Series HEPA units develop blower motor strain from Denver’s low-humidity dust loading. The 750’s sealed motor housing traps fine particulate that would dissipate in more humid climates; after 18-24 months in a Denver home, we regularly see thermal cutoff trips and reduced static pressure. We pull the housing, photograph the buildup, and either rebuild with OEM bearings or replace with a quality aftermarket motor matched to the original CFM spec. Haven Standard Clause 1 applies: written price before any part is ordered.
- PREDATOR 1200 portable units show UV-C lamp degradation that owners mistake for filter failure. The 254nm lamp output drops to ineffective levels after roughly 9,000 hours - about 12-14 months of typical residential use in Denver, where altitude already reduces UV germicidal effectiveness by approximately 15%. We meter actual UV output with a UVC radiometer, replace with Abatement Technologies-spec lamps or verified equivalents, and document the before/after reading in your job record.
- Abatement Technologies HEPA filters in older Park Hill and Capitol Hill homes load prematurely due to galvanized duct corrosion upstream. The filter itself is fine; it’s catching rust flake and biofilm that shouldn’t reach it. We scope the duct run with a camera, show you the source, and scope again after the duct repair so you can see the filter is no longer working overtime.
- Abatement Technologies air scrubbers develop negative-pressure seal fatigue in the flex-duct connection collar. The silicone gasket hardens in Denver’s dry winters, creating bypass that defeats containment. We replace with Abatement Technologies OEM collar assemblies where available, or fabricate a matched replacement from UV-stable silicone sheet - photographed, pressure-tested, and written into your warranty.
- Abatement Technologies PREDATOR 600 series units show control board humidity-sensor drift that causes false “filter change” alerts. The sensor calibrates to factory RH levels that don’t match Denver’s 15-25% winter indoor humidity. We recalibrate or replace the sensor, clear the fault code, and note the adjustment in your documented record so the next tech knows the baseline.
Our Abatement Technologies Air Quality & Sanitizing Process
- 1
Written estimate delivered first. We inspect your Abatement Technologies unit, scope accessible ductwork, and deliver a fixed price before any panel comes off. No per-vent add-ons, no “once we’re here” surprises.
- 2
Photo documentation of condition. Every register, plenum, and main trunk line is photographed before work begins. Here is what the camera found. Here is what it costs to fix it. You decide.
- 3
Diagnostic with trade-specific tools. We use Abatement Technologies-compatible test equipment - UVC radiometers, static pressure manifolds, particle counters - to identify whether the issue is filtration, sanitization, or mechanical.
- 4
OEM or verified-equivalent repair. We source Abatement Technologies OEM parts when available; when lead times stretch (common on PREDATOR 1200 control boards), we use quality aftermarket components that meet or exceed manufacturer spec, noted in writing.
- 5
Sanitizing treatment with photo-verified coverage. For mold or bacteria jobs, we apply EPA-registered sanitizer to all accessible duct surfaces, photograph coverage, and run the system to verify no residual odor or airflow restriction.
- 6
Final test and documented record delivered. Post-repair static pressure, UV output, or particle count is recorded. Your photo record, scope images, and written 365-Day Done Right Promise are delivered before we leave.
BeforeAfterWhat Abatement Technologies Air Quality & Sanitizing Costs in Denver
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Abatement Technologies HEPA unit sanitizing (single unit) | $280-$420 | Unit size, contamination level, filter replacement needed |
| PREDATOR series UV-C lamp replacement with output verification | $340-$480 | Lamp count, access difficulty, collar seal condition |
| Whole-system duct sanitizing with Abatement Technologies filtration | $520-$780 | Home size, duct material (flex vs. rigid), mold vs. bacterial treatment |
| UV light installation in existing Abatement Technologies-compatible plenum | $680-$920 | Plenum access, electrical run length, single vs. dual-lamp configuration |
| Air purifier install (Abatement Technologies or cross-compatible) | $580-$1,100 | Unit capacity, return-air integration, smart controls |
These are whole-system prices agreed before work starts. We don’t quote per-vent or per-register because that’s where the bait-and-switch lives. Bring us any competitor’s written estimate and we’ll put our number next to it for free. Call (720) 799-2292.
Why Denver Homeowners Call CleanRun Air Duct Cleaning Denver for Abatement Technologies Work
We’ve been in Denver since 2013, and Tomas Reyes still handles Abatement Technologies jobs personally when the unit is part of a larger containment or restoration setup. Our crew knows the difference between a PREDATOR 750 that needs a motor and one that needs its duct connection sealed - because we’ve photographed both failures dozens of times.
Every job carries the 365-Day Done Right Promise in writing, not as a policy subject to manager approval. Technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews. Equipment on every truck includes Abatement Technologies-compatible tools alongside Rotobrush, Nikro, Honeywell, Aprilaire, and Guardsman systems - so if your home has mixed-brand HVAC, we’re not learning on the job. We also service Lennox, Trane, and Carrier air quality equipment.
Your documented photo record is included, not an upsell. The price is written before work starts, every time.
FAQs
No, professional cleaning and sanitizing does not void your Abatement Technologies warranty, provided the work is done without altering factory electrical or structural components. We document every step with photos to prove the unit was returned to factory configuration. Call (720) 799-2292 if you need a copy of our warranty-safe practices for your records.
At Denver’s altitude, effective UV-C output typically degrades below germicidal levels in 12-14 months of continuous use, not the 24 months sometimes quoted at sea level. We meter actual output and show you the reading. Replacement with verification runs $340-$480.
Repair makes sense when the unit is under 8 years old and the failure is isolated to a motor, lamp, or seal. Replacement is the better value when the control board fails on a unit over 10 years old, or when multiple component failures indicate systemic wear. We’ll give you both numbers in writing and let you decide.
Common filters, lamps, and seals are in our Denver warehouse. PREDATOR series control boards and specialty motors typically ship in 3-5 business days. We don’t start work until parts are in hand and the price is fixed - no deposit, no “we’ll figure it out.”
Your photo record shows every treated duct run, the sanitizer application, and the post-treatment verification. We also run a particle count or UV output test where applicable and record the number. If you don’t receive your documented record before we leave, the job isn’t finished.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Denver at CleanRun Air Duct Cleaning Denver, serving Denver and nearby areas.