Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Englewood
Dryer vent cleaning in Englewood typically runs $149-$289 for a standard single-family home, with most jobs completed in 90 minutes to two hours. We dispatch crews to Englewood from our Denver office, and we know the specific vent configurations hiding in your mid-century ranch. Call (720) 799-2292 for a written estimate before any work starts.
We’ve been working in Englewood since 2013, and the houses tell us what to expect before we step inside. The post-war ranches along South Broadway, the slab-on-grade homes northwest of Belleview Park, the piecemeal additions off Oxford Avenue - we’ve scoped and cleaned vents in all of them. These aren’t new builds with straight, short runs through insulated walls. They’re original stamped-steel trunk lines with flex-duct retrofits, uninsulated attic runs that freeze in January, and crawlspace routes crushed by decades of settling. That matters because a vent that looks fine from the laundry room can be blocked ten feet away where you can’t see it. Our Dryer Vent Cleaning team carries camera equipment on every truck for exactly that reason.
Why CleanRun Air Duct Cleaning Denver Is Englewood’s Preferred Dryer Vent Cleaning Company
Englewood homeowners don’t buy from coupons. They buy from documentation. Every job we do in the 80110, 80113, and 80150 ZIP codes starts with a written price under Haven Standard Clause 1, and ends with a photo record of what we found and what we cleared.
Our crews have served more than 52,000 homes since 2013, and the 365-Day Done Right Promise applies to every one of them. If the work isn’t right, we make it right - in writing, not as a favor from a manager. Technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews, and they’re identified by name before arrival. The equipment on every truck - Rotobrush agitation systems, Nikro negative-pressure extractors, and Guardsman vent hardware - is named on your written scope so you can verify it independently.
We don’t do “call for a quote.” We do written numbers, delivered before a single panel comes off. Bring a competitor’s written estimate and we’ll put ours next to it for free under our Free Second Opinion policy.
Our Dryer Vent Cleaning Services in Englewood
Dryer Vent Inspection
Every Englewood job starts here. We run a camera from the dryer connection to the exterior cap, and what we find determines whether you need cleaning, rerouting, or repair. In the 1960s ranches near Belleview Park, we regularly see original flex connections that have sagged or crushed against joists in shallow crawlspaces. The camera shows it. The photo record proves it. The written scope tells you what it’ll cost to fix before we touch a tool.
Vent Cleaning
Standard cleaning uses Rotobrush mechanical agitation paired with Nikro negative-pressure extraction - that’s a vacuum system that pulls debris out while the brush loosens it, so nothing blows back into your laundry room. But Englewood’s conditions often demand more. Chinook winds drive alkaline clay dust through every imperfect seal, and that dust cakes onto lint in cold attic runs where condensation turns it sticky. Basic agitation won’t break that up. We use targeted compressed-air whipping and, when necessary, mechanical removal tools that a residential shop vac can’t replicate. The after photos show the difference.
Lint Removal
The lint screen catches maybe 60% of what your dryer produces. The rest enters the duct. In Englewood’s long, uninsulated runs through cold attics and crawlspaces, that lint meets condensation and hardens. We’ve pulled out mats of compressed lint mixed with clay dust that reduced airflow by 70% without ever triggering a visible blockage at the exterior cap. That’s why we scope the full run, not just the accessible sections.
Vent Rerouting
This is where Englewood’s housing stock really shows its age. Original vent runs were often retrofit through whatever space was available - cold attics, shallow crawlspaces, exterior wall cavities with no insulation. We reroute to code-compliant rigid metal with proper slope, support, and the shortest practical path to exterior. On a 1962 ranch off South Broadway, our tech scoped a dryer run that had been retrofitted through a shallow crawlspace and found the original flex connection crushed against a floor joist, trapping lint the homeowner’s trap never showed. We pulled the vent to code, rerouted it with rigid metal, installed a Guardsman bird guard, and confirmed airflow with a camera inspection before sealing the exterior penetration. Rerouting in Englewood typically runs $289-$449 depending on path length and access.
Bird Guard Installation
Englewood’s mature tree canopy and proximity to the South Platte corridor mean birds, squirrels, and the occasional raccoon investigate exterior vent caps. A Guardsman bird guard with proper mesh spacing stops them without restricting airflow. We install these as standalone service or bundled with cleaning, and we photograph the fit so you can see it’s not blocking the exhaust.
Vent Cap Replacement
Original caps on Englewood homes are often stamped metal with failed flappers or missing screens. We stock replacements that fit standard 4-inch rigid pipe and verify proper backdraft operation before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Englewood
Our trucks carry professional-grade equipment from Nikro, Honeywell, and Guardsman - brands you can look up before you agree to any work. Nikro negative-pressure extractors handle the fine particulate that standard vacuums recirculate. Honeywell airflow meters let us measure actual exhaust velocity before and after cleaning, so the improvement is documented in CFM, not just “feels stronger.” Guardsman vent hardware, including bird guards and replacement caps, is what we install when the original equipment has failed. We don’t use proprietary parts you can’t verify. Every brand is named on your written scope.
Common Dryer Vent Cleaning Problems We See in Englewood Homes
- Crushed flex connections in crawlspaces. The original 1960s flex duct was often routed through shallow crawlspaces with no support, and decades of settling have compressed it against joists or foundation walls. The dryer still runs. It just takes 90 minutes to dry a load and heats the laundry room while it struggles.
- Condensation-hardened lint in cold attic runs. Englewood’s long, uninsulated vent runs through attics that hit 20°F in January create condensation that turns lint into a sticky residue. Agitation alone won’t remove it. We use compressed-air whipping and mechanical tools, then verify with camera.
- Alkaline clay dust and wildfire ash caked onto damp lint. Chinook winds pull fine dust from the Front Range’s arid soils, and metro-wide wildfire events deposit ultrafine ash. Both find their way into imperfectly sealed duct systems and bond with lint in cold runs. The result is a dense mat that reduces airflow without ever creating a single visible blockage.
- Missing or failed exterior caps with animal intrusion. We find nests, cached food, and in one case a dead squirrel blocking a cap on a home near Hampden Avenue. The homeowner thought the dryer was failing. The camera showed otherwise.
Pricing for Dryer Vent Cleaning in Englewood, CO
Here’s what dryer vent work costs in Englewood’s market, with ranges based on what we actually quote:
| Service | Typical Range |
|---|---|
| Standard vent cleaning (single-family ranch, accessible run) | $149-$219 |
| Extended or multi-elbow run (attic/crawlspace access required) | $219-$289 |
| Vent rerouting to code (rigid metal, new path, bird guard) | $289-$449 |
| Bird guard installation (standalone) | $89-$129 |
| Vent cap replacement with airflow verification | $79-$119 |
What moves you within the range: run length, number of elbows, access difficulty (crawlspace vs. accessible attic), and whether we find damage requiring repair. Every quote is written and delivered before work starts - Haven Standard Clause 1. No per-vent pricing. No add-ons after the truck arrives. Call (720) 799-2292 and we’ll give you a specific number for your home.
We Also Serve Cities Near Englewood
Our crews work throughout the metro area. If you’re in Englewood, Littleton, Denver, Aurora, or Arvada, the same written pricing, documented photo record, and 365-Day Done Right Promise applies. Dispatch is coordinated from our Denver office, and we route crews based on your location and schedule.
Serving Englewood, CO - Our Local Coverage Area
We’re based in the Englewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Englewood
Englewood’s mid-century ranches have longer, uninsulated vent runs through cold attics and crawlspaces, and the original flex-duct connections trap lint at every splice. Centennial’s newer homes typically have shorter, insulated runs with rigid metal from the start. Add Englewood’s Chinook-driven clay dust and wildfire ash, and the material in your duct is denser and stickier than what accumulates in newer suburbs. Call (720) 799-2292 for a camera inspection that’ll show you exactly what’s in there.
Yes, with the right equipment and technique. We use Rotobrush systems with adjustable tension and camera guidance, so we’re not guessing where the duct turns or narrows. Stamped-steel trunk lines are durable but the seams can separate if handled aggressively. Our scope-first approach means we know what we’re working with before the brush enters. Call (720) 799-2292 to schedule.
An in-slab return plenum is a concrete trench cavity beneath your slab that functions as a return-air duct - common in slab-on-grade homes built in the 1950s and 1960s, particularly northwest of Belleview Park. It’s not a dryer vent component, but it connects to the same HVAC system and can harbor moisture, mold, and debris that standard equipment can’t reach. We identify these with camera inspection and have the specialized tools to clean them when found. Most homeowners don’t know they have one until we show them. Call (720) 799-2292 if you want your system scoped.
We do both, and Englewood’s housing stock often needs rerouting. Original runs through cold attics or crushed crawlspace flex are common here. Rerouting to code-compliant rigid metal with proper slope and support typically costs $289-$449 in Englewood, and we include a bird guard and airflow verification in that scope. The written price comes before any work starts. Call (720) 799-2292 for a specific quote on your home.
We document every run with before-and-after photos, and we measure exhaust airflow in CFM using a Honeywell meter. You get the photo record and the airflow numbers as standard deliverables. If the after photo doesn’t show clean metal and the airflow hasn’t improved measurably, we haven’t finished. That’s backed by the 365-Day Done Right Promise. Call (720) 799-2292 to schedule a documented cleaning.
Ready to see what’s actually in your vent? Call (720) 799-2292 for a free, written estimate. We’ll scope the run, show you what we find, and give you a fixed price before any work starts. Every job includes a documented photo record and the 365-Day Done Right Promise.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Englewood since 2013.